Personal Anti-Fatigue Mats ESD

The PAM ESD

Personal Anti-Fatigue Mats ESD 2017-01-27T23:44:39+00:00

Personal Anti-Fatigue Mats ESD

FOR MAXIMUM SHOCK ABSORPTION, COMFORT, AND ANTI-STATIC CONTROL

Recommended for use in Industrial and Extra-Depth Footwear

Personal Anti-Fatigue Mat (PAM) Insoles represent a unique and cost effective opportunity for the selective relocation and/or replacement of expensive anti-fatigue matting.

Unique Features

  • ESD Threads Provide Proven Electro-Static Dissipation
  • Maximum Shock Absorption
  • Dual Layered Memory Foam Technology
  • Maximum Comfort
  • Machine Washable
  • Available in 12 Unique Sizes
  • Memory Foam Compresses for Safe Clearance in Steel Toe Footwear
  • Anti-Fungal, Anti-Bacterial, Anti-Perspiration, Odor Reducing Scent

More Effective than Standard Anti-Fatigue Matting

All materials carry some quantity of electrons which give the material a net charge. This charge is said to be static since the charge carriers aren’t going anywhere. The Electrostatic Discharge event occurs, when any two materials are put together, or brought near to each other, or are separated. During this movement of materials relative to each other, electrons will migrate from one material to the other. This movement of electrons (which are charge carriers) is an electrical flow or current and is considered a discharge, hence the name Electrostatic Discharge.

Where to Buy

Are you looking to purchase on behalf of a company or a large order quantity?

Find a Distributor Store Location Near You.
Where to Buy
Buy Now

FEATURED ONLINE USA DISTRIBUTOR

WORKWEARBOOTS.COM
Buy Now
Buy Now

FEATURED ONLINE CANADIAN DISTRIBUTOR

WORKAUTHORITY.CA
Buy Now

In many cases, Electrostatic Discharge events of only a few volts is enough to cause serious permanent damage to semiconductor devices. At the microscopic level, the damaged area looks like a moon crater or a welded spot where the silicon materials where melted and fused together. Electrostatic Discharge events do not always destroy an electronic component immediately on the first occurrence. Sometimes, many events occur over a period of time. Each occurrence adds a bit more damage until the component finally fails. Any damage is always permanent and cumulative. Once the device finally fails completely, the failure is referred to as a catastrophic Electrostatic Discharge failure. Electrostatic Discharge damage which is not catastrophic leaves the component operable, but damaged, such that it will fail at a later time under normal stresses.

The worst part of Electrostatic Discharge is that the damage occurs deep within the device at a microscopic level, so you cannot ever see it to verify that Electrostatic Discharge was the culprit.

Despite a great deal of effort during the past decade, Electrostatic discharge still affects production yields, manufacturing costs, product quality, product reliability, and profitability. Industry experts have estimated average product losses due to static to range from 8-33%. Others estimate the actual cost of Electrostatic discharge damage to the electronics industry as running into the billions of dollars annually. The cost of damaged devices themselves ranges from only a few cents for a simple diode to several hundred dollars for complex hybrids.

As a result it is vital in clean rooms and other technical sensitive areas that these Electrostatic Discharges are controlled. One common Electrostatic Discharge event occurs simply when a person walks across the floor. Static electricity is generated as shoe soles contact and then separate from the floor surface.

By definition for a material to be antistatic or electrostatic dissipative (ESD) it must have a electrical resistance between the limits of 1×105 Ohms/square and 1×1012 Ohms/square. Anything over 1×1012 Ohms/square is considered insulative and not safe.

When used in conjunction with ESD flooring, ESD footwear is a very reliable method of grounding personnel. The charge goes to ground rather than being discharged into a sensitive part. To prevent damaging a charged device, the rate of discharge can be controlled with static dissipative materials. No special socks are needed as the electric path from sole to body is made through natural perspiration

Electrostatic discharge footwear is designed to ensure constant drainage of static charges from the body to ground. For ESD footwear to be effective both inner soles and outer soles need to be static dissipative and provide continuous electric contact of the foot to ground as required by ESD standards.

Replacing the ESD insole that is found in ESD footwear with a standard non ESD insole will nullify the ESD properties of this footwear.

Corporate Benefits
Testing & Research

FREE Product Samples

Request Here
Request Here
Subscribe
SUBSCRIBE NOW

Join Our
Newsletter Today! 

Receive all the latest updates, new products & much more.
close-link
[tcm id="1"]